- EOL-EOS for UCSB-5108-AC2 Chassis with UCS-IOM-2408
This appears to be for the UCSB-5108-AC2 Chassis with UCS-IOM-2208. I know the end of sale for the UCSB-5108-AC2 Chassis with UCS-IOM-2408 was not December 5, 2020 because we ordered them in December …
Cisco UCS 5108 Blade Server Chassis Spec Sheet
Chassis Front Views Figure 4 is a detailed front view of the Cisco UCS 5108 Blade Server Chassis with eight half-width blade servers installed.
Solved: UCS 5108 Chassis eol – Cisco Community
Solved: Currently we are using the UCS 5108 N20-C6508 chassis. But its in eol . So can we renew the contract for hardware support or we have to replace the whole chassis?
Quick question – 5108 chassis max power – Cisco Community
The Cisco UCS 5108 Blade Server Chassis is powered by 208 V (220 V outside the US) 50-60 Hz AC. Up to four power supply units (PSUs) may be installed, each with a single C20 connector for input power …
5108 chassis and power failure – Cisco Community
Hello all, I have a fully populated 5108 chassis with 8 x B200 M5 servers. The chassis has 4 power supplies which are configured in a grid mode. Power supply 1+2 are connected to the same PDU and powe …
Cisco UCSB-5108-AC2= EOS
Hi, I would like to know Cisco UCSB-5108-AC2= chassis End of Sale Announce Date.
Cisco UCS 5108 PSU故障
有一台5108的UCS PSU4 OK指示灯绿灯闪烁，整个刀框风扇转速忽高忽低，登录管理查看如下图，更换PSU故障依旧，OK指示灯依然绿灯闪烁，管理界面查看状态有时error，求教大神们这种问题该如何解决:L …
Update firmware Cisco UCS 5108
Hello. We have a blade server UCS with firmware 2.2, don’t ask how it happened. We want to upgrade to 4.x, what is the best and correct way for us to do it? It is possible to update to a version where …
Cisco UCS 5108 firmware upgrade
That same doc has section: Manage Firmware through Cisco UCS Manager The Infrastructure (UCSM / Fabric Interconnects / IOMs) firmware upgrade can be done with the environment online, but "problem …
咨询UCS电源供电问题 – Cisco Community
请问 我有一台UCS 5108 想在线更换PDU，请问在4路电源模块都在供电情况下（每路是2500W的功率，实际现在每路550W左右），能不能断开一路？
コメント